Commercial Ice Machine Repair in Pawnee, OK
An ice machine down in an Oklahoma summer means buying bagged ice by the pallet. We repair cubers, flakers and nugget machines — water systems, harvest cycles, sealed systems and controls — and deep-clean and sanitize the machine before we leave.
Commercial Ice Machine Service for Pawnee Businesses
We handle commercial ice machine repair throughout Pawnee and the rest of Pawnee County, including Pawnee Lake and Highway 18. Most of our commercial work in Pawnee is restaurants & bars, gas stations & c-stores, hotels & event venues — restaurants that need the line back before dinner, convenience stores with a cooler line to protect, and campus kitchens working around a class schedule.
Call (405) 200-1490 early in the day for the best chance at same-day commercial service in Pawnee. Every visit ends with a written diagnosis and a firm price before any work starts.
Symptoms We See in Pawnee
- No ice production or a machine stuck in harvest
- Thin, hollow or cloudy cubes
- Bin thermostat or level sensor not shutting the machine off
- Water leaking from the sump, curtain or drain
- Scale, slime or pink mold in the water path
- Error codes and repeated safety lockouts
What The Repair Covers
- Full water-path descale and sanitize
- Water inlet valve, float, pump and distributor repair
- Harvest cycle, hot-gas valve and thermostat diagnostics
- Sealed-system testing, leak repair and recharge
- Control board, sensor and bin switch replacement
- Water filter replacement and flow verification
Ice Machine Brands We Service in Pawnee
- Hoshizaki
- Manitowoc
- Scotsman
- Ice-O-Matic
- Follett
- Cornelius
- Kold-Draft
Questions From Pawnee Operators
- How often should a commercial ice machine be cleaned?
- Every six months at minimum, and quarterly on hard Oklahoma water or in high-volume bars. Scale is the number one cause of low production and premature part failure.
- My machine makes ice but only half as much as it used to.
- Usually scale, a dirty condenser, high ambient temperature in the equipment room or a weakening sealed system. We measure production rate against the spec sheet to tell them apart.
- Do you work on nugget and flake machines?
- Yes — auger, gearbox, bearing and evaporator work on nugget and flaker machines as well as standard cubers.
Other Commercial Repairs in Pawnee
- Walk-In Cooler Repair in Pawnee
- Walk-In Freezer Repair in Pawnee
- Commercial Refrigeration Repair in Pawnee
- Beverage & Merchandiser Cooler Repair in Pawnee
- Commercial Oven Repair in Pawnee
- Commercial Fryer Repair in Pawnee